Carry more with your MiR100 or MiR250 autonomous mobile robots by adding the MiR Hook TM top module. Movement of large loads, whether heavy or not, can be automated even in a busy traffic area by adding the MiR Hook to your MiR AMR. With dramatically greater flexibility than an AGV, and a far higher safety factor than fork lifts, fork trucks, hand dollies, 2-wheelers, or hand carts, the MiR Hook safely navigates through a production area.
AUTOMATED GUIDED VEHICLE
No, its not your average tethered AGV. Using QR markers, not cables or wires, the MiR Hook identifies carts, autonomously connects to them, and then delivers them as you prescribed. This is all done automatically with the warehouse robot navigating around temporary obstructions, newly placed permanent obstructions, or people walking through or blocking pathways, as it effortlessly and continuously recalculates the most efficient route for it to take.
Length - 46.5 inches to 50.2 inches depending on the chosen position of the hook
Width - 22.8 inches
Height - 21.7 to 35.4 inches depending on the chosen position of the hook
Gripping height above the floor - 2 inches to 13.4 inches
Weight - 216 lbs
Load on cart at <1% incline - 661 lbs
Load on cart at 5% incline - 441 lbs
Gripping height above the floor - 3.1 inches to 13.8 inches
Weight - 414 lbs
Load on cart at <1% incline - 1100 lbs
HTE Automation and Mobile Industrial Robots help regional manufacturers and warehouses lower costs by improving plant safety and efficiency in Kansas, Missouri, and Illinois